Get That Shine Back On Your Floor By Following These Tips

If you are somebody who does a lot of do it yourself kind of projects, you may be tempted to do your own Timber Deck Staining or Floor Sanding & Polishing so you can show it off to your friends when they come over. There is nothing wrong in getting some satisfaction for having done it with your own hands.

When should you stain your decking?

Do not apply the stain when it is too frosty or cold, it just won’t dry. Do not just apply any Epoxy Coatings Brisbane has to offer or you will regret it afterwards. Also, do not apply the stain in direct sunlight. Also, stay away from Floor Sanding & Polishing in direct sunlight and also when the deck surface is too hot. If the stain dries too soon, you will not be able to get an even coating, and it will not have a chance of soaking inside the wood. It will also reduce the protective qualities of the stain. If the stain overheats, you may also be at the risk of breathing in harmful gases that are being released. You should wait until the deck has adequate shade before you start applying the stain.

Prepare the Surface

The wood has to be free from all dirt and stains before you apply any Epoxy Coatings Brisbane has provided you with. You should start by sanding any splintered spots. Always wear a safety mask so that you do not end up inhaling the dust. Clean the deck and make use of a putty knife for cleaning between the wooden boards. Next, use a desk cleaner to clean the wood. You could also use a pressure wash but then you will need to give 2 to 3 days for the wood to dry off completely.

Use the Right Brush

Synthetic brushes work the best for applying a water-based stain to the wood. Bristles made of natural hair are hollow and this they tend to lose their rigidity. They go limp when they absorb water during the finish. You can also use a roller if you prefer it over a brush. Use a roller that has a nap one-fourth of an inch or even shorter. That will let you apply a very thin layer of stain that will stick to the wood without creating any puddles.

Apply Thin Coats

If you plan on using a lot of stain for your do it yourself project, then first start by mixing them all well together so that the color will be consistent. Your Timber Deck Staining project will require you to be very patient in the process of staining your floor. You should be using long and smooth strokes for staining 2 or 3 boards ate one time. Apply the solid stains in very thin coats. You can also use semi-transparent stains or clear sealers in coats that are even thinner. This will prevent puddles. Now puddles do not soak into the wood and that leads to the stain flaking off when the surface dries off.

So, now you know a thing or two about staining your floor. Go ahead and enjoy your staining.